Note: For more customization requirements or you are not sure the type of car, please contact our customer service ( [email protected] ), thank you!
Highlight the car logo
Dress up with illuminated door sill trim. It lights up the logo on the car door sill step and make your passengers to notice it right away! The bright and soft light will also illuminate the entire door in the dark, making it easy to get on and off the car.
Protect the car door sills
The use of led door sill guard can also reduce the scratching of the original door sill when getting on and off the car.
This car door sill pedal is not factory size with the car. Its size is the most suitable size we tailor-made according to the car sill. The installation may be a direct replacement for, or directly over, the factory door sill plates.
Two installation methods
Vehicle Power Supply DC 12V, connect the LED door sill wires to the power wires of the car door sensor, and the wiring is more beautiful. Powered by AA Battery, no wiring required, only need your own batteries (each pedal needs 4 AA batteries), so the installation is more convenient. You can purchase according to your needs.
Custom LED LOGO door sills
We provide professional customized services. If you have special requirements, you can contact our customer service for consultation. We can customize the shape, size and logo of the sill pedal for you. Even more custom products.
Power Supply Method:
Vehicle Power Supply DC12V —– Wiring Required
Powered by 4 AA Batteries 5V—— Free Wiring
Material: PMMA Acrylic + High brightness LED
Waterproof rating: IP67
Vehicle Power Supply DC 12V, Handwired led door sill guard is usually wired to the positive and negative of the car’s door sensor. The illuminated car sill will light up when the door is opened and turn off when the door is closed.
Powered by AA Battery, led door sill runs on batteries only, no wiring required. The switch is controlled by a small magnet. The light turns off when the magnet is close and turns on when it moves away. The magnet is installed at the bottom of the door, corresponding to the magnet sensing area of the door sill plate below. There is also a power switch on the battery box.
“stay on” means the lights stay on when the door is opened and nothing else changes.
“flash&flow” means the lights come on and flow and flash when the door is opened.
Colorful (auto-changing): No remote control, colorful flowing and flashing. The flowing mode, breathing mode, gradient mode, and flashing mode keep cycling after opening the door.
Colorful (RF remote control): The remote control controls the color and mode. Yellow, orange, red, green, cyan, blue, purple, white. stay on, breathing, gradient and flashing mode, sound sensing mode.
Colorful (RF&APP remote control): Both remote control and mobile APP can be controlled. RGB color wheel, colors can be adjusted at will. Stay on, breathing, gradient, flashing, music and sound sensing mode. The wiring version light will go off when the door is closed. The battery powered version will light up when the door is opened, and then automatically turn off after displaying all lighting modes in two cycles (the LED door sill panels also turn off as the door closed). It will light up again as the door open. Generally, it keeps light up for about 1 minute. The duration of the light is proportional to the length of the door sill pedal. The longer the door sill pedal, the longer the light could stay on.Installation guide:
Vehicle Power Supply DC 12V
1. Test if the led door sill is working properly.
2. Make sure the installation position and clean to make it dry.
3. Find out the positive and negative poles of the car door power wires and connect to the positive and negative poles of the door sill pan. (red wire connects to the positive and black wire connects to the negative.)
4. Peel off the 3M double-sided adhesive protective film on the back of the door sill pans and install the door sill pan to the correct position. Press to make it fit snugly.
5.Tidy up the wires and the installation are complete.
Powered by AA Battery
1. Get the AA batteries ready then put them into the battery box to check the work of led door sill.
2. Tear off the 3M tape on the back of the door sill pedal, and attach the door sill pedal to the install location.
3. Be aware there’s a small magnet that comes with the battery door sills, which need to attach to the bottom of the door, aiming at control point on the led door sills. Suggesting to identify the control point before installation.
4. Hide the battery box and wires.
Note: Battery is not included in our product package. Each pedal needs 4 AA batteries for power supply. Please prepare the batteries by yourself.
1. AoonuAuto LED Door Sills are not the OEM part (not factory door sill). We just customize more car accessories for your vehicle to let it more attractive.
2. Different models have different shape and size of door sill, so as their installation methods. For some models, the factory door sill can be directly covered by the LED door sill panels, while other models might need to disassemble the factory door sill and replace it with LED door sill pedals.
3. The acrylic door sill pedals couldn’t cover the curved area of the door steps.
After Sales Services:
1. LED door sills are customized product. After starting its production, if there is no quality problem or defect manufacturer, it does not under the refund policy.
2. We provide 1-month replacement and 1-year warranty policy, which is not applicable to artificial damage and other subjective reason.
3. If you have any question, contact us please.