For more customization requirements, please contact our customer service, thank you!
Feature:
Well Protect And Good Lighting Guide
Toyota LED door sill can well protect the original door sill of the car from scratches and damage. If you want to cover an already scratched door sill, our door sills guards are also a good choice. The bright light when the door is opened also provides sufficient illumination for entering and exiting the car.
Stylish Car Lighting Accessories
LED door sill Step pedal is a personalized car lighting. When you open the door, the door sill panel will light up (turn off as the door closed) and display the name and logo of the vehicle.
Waterproof And Dustproof
IP67. You don’t need to worry about rain and snow weather will get wet and dirty the led door sill. It is made of acrylic, and the smooth surface is easy to clean.
Specification:
Power Supply Method: Powered by 4 AA Batteries
Material: PMMA Acrylic + High brightness LED
Waterproof Rating: IP67
Thickness: about 0.5cm
Working Mode:
Powered by AA Battery, led door sill runs on batteries only, no wiring required. The switch is controlled by a small magnet. The light turns off when the magnet is close and turns on when it moves away. The magnet is installed at the bottom of the door, corresponding to the magnet sensing area of the door sill plate below. There is also a power switch on the battery box.
“stay on” means the lights stay on when the door is opened and nothing else changes.
“flash&flow” The battery powered version will light up when the door is opened, and then automatically turn off after displaying all lighting modes in two cycles (the LED door sill panels also turn off as the door closed). It will light up again as the door open. Generally, it keeps light up for about 1 minute. The duration of the light is proportional to the length of the door sill pedal. The longer the door sill pedal, the longer the light could stay on.
Installation guide:
1. Get the AA batteries ready then put them into the battery box to check the work of led door sill.
2. Tear off the 3M tape on the back of the door sill pedal, and attach the door sill pedal to the install location.
3. Be aware there’s a small magnet that comes with the battery door sills, which need to attach to the bottom of the door, aiming at control point on the led door sills. Suggesting to identify the control point before installation.
4. Hide the battery box and wires.
Note: Battery is not included in our product package. Each pedal needs 4 AA batteries for power supply. Please prepare the batteries by yourself.
Attention:
1. AoonuAuto LED Door Sills are not the OEM part (not factory door sill). We just customize more car accessories for your vehicle to let it more attractive.
2. The acrylic door sill pedals couldn’t cover the curved area of the door steps.
After Sales Services:
1. LED door sills are customized product. After starting its production, if there is no quality problem or defect manufacturer, it does not under the refund policy.
2. We provide 1-month replacement and 1-year warranty policy, which is not applicable to artificial damage and other subjective reason.
3. If you have any question, contact us please.